Capsizing Drills in a Topper Xenon

It happened again last weekend with my Father as we sailed up the River Colne...the shame...!

We went over on a tack, which was interesting as the dinghy has come near to doing this before with other novice crew. I am beginning to have a theory as to how this might happen - beyond blaming myself.

Firstly the cleats that hold the jib sheets on the Topper Xenon often out-fox novice crew who I have seen have difficulty releasing them. When on a close haul the jib is set very tight and so is the cleat holding the jib-sheet. Coming round on a close haul tack, if the sheet is not released properly the nose will continue to pull round and instead of being on a close haul (opposite tack) you will find yourself coming on to on a beam reach. Obviously with a tight main sail + slow speed over you go. So, lessons to be learned are as follows...

• Teaching your crew how to operate the cleats and warning them of consequences if they get it wrong.
• Helmsmen don't be lazy and be ready to let the main sail go if things go wrong on the tack (i.e. take it off the cleat).

Finally, make sure you explain in detail what you want the crew to do when you go over. Novice crew have a tendency not to want to go in the water (quite understandable really), but the Topper Xenon floats very high on its side and with the crew trying to clamber desperately up the inside, the boat is inclined to turtle making it harder to right.

• Tell them to get in the water and swim to the back to hang on to the toe straps).
• Always be nice to the Romford Navy, speedboats and barges as you may need their help one day.